Choose your MacBook family to browse for compatible parts. Either a 60 or 85-watt MagSafe adapter will keep your MacBook charged and happy. Instead I use an old BIC pen ink straw making sure the bends don’t exceed the radius of the straw. For the early generation MacBook, upgrades are easy Any 9.5mm SATA hard drive is compatible with these machines, and two RAM slots allow for a fast speed boost. Creasing the cable damages the thin foil wires within the ribbon cable. Don’t crease the cable as people tend to do that for the areas the cable needs to bend. To add to it this cable is fragile! Your Hard Drive Cable Is A Ticking Time BombĪs such when ever I replaced the drive with a SSD drive I always replace the cable as any defect in the cable will make you pullout your hair!īut, you also need to not man-handle the cable! As that too will damage it. Yet because the product is made by Apple, a seemingly simple procedure turns out to be a day-long adventure into the. This tended to be an issue with early versions of the system as Apple used at the time a SATA II (3.0 Gb/s) HDD and the cable was not able to support the higher data rate of the better 3rd party SATA III (6.0 Gb/s) HDD’s. So I decided to replace its spinning hard disk drive with a solid state one. I would use a bootable OS installer USB thumb drive to re-install the OS so the installer updates the systems firmware.
So a common issue is the replacement logic boards firmware is still the older version so it doesn’t know how to boot up under the newer macOS.
As you are running Catania your drive is running APFS.
0 kommentar(er)
